If you want to add handles, add one to each side. Attach another ‘top/bottom’ board right by the other ‘top/bottom’ board and secure it to the ‘short side’ board with 1 1/4″ screws.Īttach the last ‘long side’ board with wood glue and 1 1/4″ screws to the ‘short side’ and ‘top/bottom’ boards. Use 1 1/4″ minimum to secure a ‘top/bottom’ board to the ‘long side’ board as shown.Īdd a bead of wood glue to 2 sides of the ‘short side’ boards and attach it to the ‘long side’ and ‘top/bottom’ boards with 1 1/4″ screws. The holes should be about 3/8″ away from the side and evenly spaced.Īdd a bead of wood glue along one of the sides of a ‘long side’ board. Use a countersink bit (or a regular drill bit about the size of the screw shank) and drill holes for the screws as shown in the sketch. One set of 9 blocks I left natural wood.Ĭut the 4 pieces of 1×8 to be 19 3/4″ long. I had my helpers paint 9 jumbo jenga blocks in each color. (If you leave them natural wood you won’t have this issue.) You can coat them with a clear coat or wait until the paint has fully cured. So the blocks want to stick to each other. One issue with latex is that it dries in a day, but doesn’t cure for a few weeks. I used latex paint (ultra pure white, the real teal, pimento, paradise sky and cherries jubile). Paint or stain the jumbo jenga blocks if desired. I used a belt sander for this part to make it faster, a regular hand sander will work too. (Sometimes those kids toys can be useful :-) ). I used a miter saw and set up a stop block on the left side so I didn’t have to measure every piece.Ĭut 54 jumbo jenga pieces. 1 – 3 1/2″ x 3 1/2″ x 3 1/2″ from a 4×4 postĬut the 2×3 boards into 7 1/2″ long pieces, you should be able to get 12 – 7 1/2″ pieces from each 2×3 board.54 – 1 1/2″ x 2 1/2″ x 7 1/2″ jenga block pieces cut from the 2×3 boards.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |